Aquamicron

Coulometric Reagents

AQUAMICRON® AXI
AQUAMICRON® AX
AQUAMICRON® AX01
AQUAMICRON® AS
AQUAMICRON® AKX
AQUAMICRON® CXU
AQUAMICRON® FLS

Volumetric Reagents

AQUAMICRON® Titrant SS-Z 1mg
AQUAMICRON® Titrant SS-Z 3mg
AQUAMICRON® Titrant SS-Z 5mg
AQUAMICRON® Solvent GEX
AQUAMICRON® Solvent OLX
AQUAMICRON® Solvent OLII
AQUAMICRON® Solvent KTX
AQUAMICRON® Solvent SU

AQUAMICRON® Titrant SS 1mg
AQUAMICRON® Titrant SS 3mg
AQUAMICRON® Titrant SS 10mg
AQUAMICRON® Solvent ML
AQUAMICRON® Solvent MS
AQUAMICRON® Solvent CM
AQUAMICRON® Solvent CP
AQUAMICRON® Solvent PP
AQUAMICRON® Solvent PE
AQUAMICRON® Solvent FM
AQUAMICRON® Solvent ME

For Coulometric Titration
	AQUAMICRON® Water Standard 0.1
	AQUAMICRON® Water Standard 0.2
	AQUAMICRON® Water Standard 1
	AQUAMICRON® Check Solution P
For Volumetric Titration
	AQUAMICRON® Water Standard 10
	AQUAMICRON® Standard Water/Methanol
For Vaporization Method
	AQUAMICRON® Solid Water Standard

AQUAMICRON Series

There are two types of coulometric reagents: the anolyte (generating solution),which is placed in the anode chamber of the electrolysis cell, and the catholyte (counter electrolyte), which is placed in the cathode chamber. There are also special anolyte for use with ketones, lower carboxylic acids and silicone oils. AQUAMICRON® can be used in coulometric moisture measurement systems sold by various companies, and it has a worldwide reputation for excellent performance.

AQUAMICRON Series

AQUAMICRON® Series

Product name		Use	Specification	Package
	AXI	*AXI [For frit or fritless type cell, equivalent to FLS] *AXI, AX & AX01[For General-use] Organic solvents, Inorganic chemicals, Oiles, Petroleum products, Various kind of gases, etc.	Moisture maximum 0.15mgH2O/mL	500mL
	AX			500mL
	AX01			100mL
	AS	[For Oils] Naphtha, Gasolone, Diesel oil, Electrical insulation oil, etc.	Moisture maximum 0.15mgH2O/mL	500mL
	AKX	[For Ketones] Ketones. Silicone oils. Low carboxylic acids, etc.	Moisture maximum 0.15mgH2O/mL	500mL
	CXU	[Catholyte] Both AX and AS and AKX available to combine with	Moisture maximum 0.6mgH2O/mL	5mL x10/case
	FLS	[For fritless type cell] Organic solvents, Inorganic gases, etc.	Moisture maximum 0.15mgH2O/mL	500mL

AQUAMICRON® AXI/CXU or AX/CXU
Use:General samples
Characteristics:

Minimal environmental contamination	•	Does not include carbon tetrachloride or chloroform
Wide range of applications	•	Suitable for petroleum products
	•	Can be used with moisture vaporization method (When using AQUAMICRON® AX or AXI in a moisture vaporization method, replenish the vaporized portion with methanol.)
High quality, high performance	•	Excellent reputation for accurate moisture measurement and end-point stability Approximately 800mg of moisture can be measured per 100mL of AQUAMICRON® AX or AXI, and approximately 150mg per 5mL of AQUAMICRON® CXU
Easy to use	•	These products can be used in the existing coulometric moisture measurement system

AQUAMICRON® AS/CXU
Use:General samples
Characteristics:

Wide range of applications	•	Especially suitable for oils, petroleum products
High quality, high performance	•	Excellent reputation for accurate moisture measurement and end-point stability.
	•	Approximately 800mg of moisture can be measured per 100mL of AQUAMICRON® AS, and approximately 150mg per 5mL of AQUAMICRON® CXU.
Easy to use	•	These products can be used in the existing coulometric moisture measurement system.

AQUAMICRON® AKX/CXU
Use:Ketones, lower carboxylic acids, some aldehydes (aromatics)
Characteristics:

Minimal environmental contamination	•	Does not include chloroform or methyl cellosolve
Wide range of applications	•	Suitable for ketones, lower carboxylic acids and some aldehydes
High quality, high performance	•	Accurate moisture measurement, good end-point stability
High quality, high performance	•	Approximately 300mg of moisture can be measured per 100ml of AQUAMICRON® AKX, and approximately 100mg per 5mL of AQUAMICRON® CXU (when used with AQUAMICRON® AKX).
Easy to use	•	These products can be used in the existing coulometric moisture measurement system.

AQUAMICRON® AXI or FLS
Use:Suitable for alcohols, esters, benzene, toluene, inorganic gases, etc.
Characteristics:

Easy to use

•

AQUAMICRON® AXI or FLS is a single-solution type reagent. It should be used in single-solution electrolytic cells without diaphragm, fritless type cell.

•

Can be used with moisture vaporizati on method(When using AQUAMICRON® AXI or FLS in a moisture vaporization method, replenish the vaporized portion with methanol.)

Easy to use

•

Ceramic diaphragm is not used, therefore it is easy to maintain electrolytic cell in good condition.

ENQUIRY

Aquamicron

CATEGORIES

Aquamicron

Aquamicron

ANNOUNCEMENTS

OSEA Offshore Energy Week

19-21 November 2024

Marina Bay Sands, Singapore

Visit us @ Booth No. Booth BJ6-01

READ MORE